USB 3.0 KVM 2x1 Switch With Remote for 2 Computers Share 1 HDMI-compatible Monitor and Keybord/Mouse/Printer(4 USB Peripherals)

USB 3.0 KVM 2x1 Switch With Remote for 2 Computers Share 1 HDMI-compatible Monitor and Keybord/Mouse/Printer(4 USB Peripherals) is designed for practical monitoring, testing or inspection in compatible home, workshop and professional environments. It combines a portable format with clearly presented controls for efficient everyday use.

Key features and benefits

• Share peripherals: Connect compatible USB devices to more than one computer and switch between hosts.
• Reduce desk clutter: Avoid reconnecting the same keyboard, mouse or printer repeatedly.
• Fast switching: Use the control provided to move connected peripherals between systems.
• Broad desk use: Suitable for home offices, studios, service benches and multi-computer workstations.
• USB performance: Available speed depends on every host, cable and device in the connection chain.

Technical specifications

Recommended applications

Suitable for the compatible electrical, electronic, mechanical, computer, property-monitoring or garden tasks described above. Confirm that the product’s range, interface, dimensions and environmental rating suit the intended job.

Setup and operation

1. Inspect the unit and supplied accessories before first use.
2. Install, connect or position the product according to its intended function.
3. Select the correct operating mode, unit or channel before testing.
4. Perform an initial check in a controlled situation and compare results with a known reference where accuracy is important.
5. Disconnect safely, clean the product and store it in a dry location after use.

Compatibility

Check connectors, supported systems, measurement limits, sensor or probe dimensions, wireless protocol, power input and installation requirements before ordering. Smart Wi-Fi products generally require a compatible 2.4 GHz network; Zigbee products require a compatible Zigbee hub unless stated otherwise.

Package information

Supplied as the product package shown for this listing. Computers, phones, test samples, tools, pipes, vehicles and other demonstration items are not included unless explicitly stated.

Important notes

Electrical testing and switchboard installation must stay within the product’s rated limits and should be completed by a suitably competent person. Measurement results are for the intended product application and should not replace certified instrumentation where regulatory or safety-critical verification is required.